Sensors

The D+H KA 34/600 is a PLP chain drive for the electrically motorised opening and closing of windows and hatches. With 24 V DC, a pushing and pulling force of 300 N and a stroke of 600 mm, the drive is suitable for smoke extraction in accordance with DIN EN 12101-2 as well as for daily natural ventilation.Installation is carried out on the window frame or sash profile. Thanks to microprocessor-controlled motor electronics, all functions can be individually configured via Powerline (PLP) and the D+H SCS software. A high-speed function, adjustable anti-pinch protection and automatic seal relief ensure safe and long-lasting operation.FeaturesPLP chain drive for smoke and heat extraction (RWA) and ventilation systems24 V DC operating voltage300 N thrust and tensile force600 mm strokeMounting on window frame or sash profileProgrammable via Powerline (PLP) and D+H SCS softwareHigh-speed function for smoke and heat extractionPassive and active anti-pinch protectionAutomatic seal reliefConnection possible on the left or rightTechnical dataOperating voltage: 24 V DC (±15 %)Current consumption: 1 ADuty cycle: 30 % (3 mins ON / 7 mins OFF)Pushing and pulling force: 300 NStroke length: 600 mmOpening speed: 11.8 mm/sTravel speed UP (RWA): 12.2 mm/sTravel speed DOWN: 11.8 mm/sProtection class: IP32Temperature range: -15 °C to +75 °CHousing: Aluminium, powder-coatedDimensions (W × H × D): 546 × 40 × 59 mmContents of deliveryD+H KA 34/600 PLP chain drive2.5 m silicone connection cableUser manual

The D+H KA 34/800 is a PLP chain drive for the electrically powered opening and closing of windows and hatches. With 24 V DC, a pushing and pulling force of 300 N and a stroke of 800 mm, the drive is suitable for smoke extraction in accordance with DIN EN 12101-2 as well as for daily natural ventilation.Installation is carried out on the window frame or sash profile. Thanks to microprocessor-controlled motor electronics, all functions can be individually configured via Powerline (PLP) and the D+H SCS software. A high-speed function, adjustable anti-pinch protection and automatic seal relief ensure safe and long-lasting operation.FeaturesPLP chain drive for smoke and heat extraction (RWA) and ventilation systems24 V DC operating voltage300 N thrust and tensile force800 mm strokeMounting on window frame or sash profileProgrammable via Powerline (PLP) and D+H SCS softwareHigh-speed function for smoke and heat extractionPassive and active anti-pinch protectionAutomatic seal reliefConnection possible on the left or rightTechnical dataOperating voltage: 24 V DC (±15 %)Current consumption: 1 ADuty cycle: 30 % (3 mins ON / 7 mins OFF)Pushing and pulling force: 300 NStroke length: 800 mmOpening speed: 11.8 mm/sTravel speed UP (RWA): 12.2 mm/sTravel speed DOWN: 11.8 mm/sProtection class: IP32Temperature range: -15 °C to +75 °CHousing: Aluminium, powder-coatedDimensions (W × H × D): 646 × 40 × 59 mmScope of supplyD+H KA 34/800 PLP chain drive2.5 m silicone connection cableInstruction manual

The D+H KA 54/350 is a PLP chain drive for the electrically motorised opening and closing of windows and hatches. With 24 V DC, a pushing and pulling force of 500 N and a stroke of 350 mm, the drive is suitable for smoke extraction in accordance with DIN EN 12101-2 as well as for daily natural ventilation.Installation is carried out on the window frame or sash profile. Thanks to microprocessor-controlled motor electronics, all functions can be individually configured via Powerline (PLP) and the D+H SCS software. A high-speed function, adjustable anti-pinch protection and automatic seal relief ensure safe and long-lasting operation.FeaturesPLP chain drive for smoke and heat extraction (RWA) and ventilation systems24 V DC operating voltage500 N thrust and tensile force350 mm strokeMounting on window frame or sash profileProgrammable via Powerline (PLP) and D+H SCS softwareHigh-speed function for smoke and heat extractionPassive and active anti-pinch protectionAutomatic seal reliefConnection possible on the left or rightTechnical dataOperating voltage: 24 V DC (±15 %)Current consumption: 1.4 ADuty cycle: 30 % (3 mins ON / 7 mins OFF)Pushing and pulling force: 500 NStroke length: 350 mmOpening speed: 11.8 mm/sTravel speed UP (RWA): 13.3 mm/sTravel speed DOWN: 11.8 mm/sProtection class: IP32Temperature range: -15 °C to +75 °CHousing: Aluminium, powder-coatedDimensions (W × H × D): 421 × 40 × 59 mmScope of supplyD+H KA 54/350 PLP chain drive2.5 m silicone connection cableOperating instructions

The D+H KA 54/600 is a PLP chain drive for the electrically motorised opening and closing of windows and hatches. With 24 V DC, a pushing and pulling force of 500 N and a stroke of 600 mm, the drive is suitable for smoke extraction in accordance with DIN EN 12101-2 as well as for daily natural ventilation.Installation is carried out on the window frame or sash profile. Thanks to microprocessor-controlled motor electronics, all functions can be individually configured via Powerline (PLP) and the D+H SCS software. A high-speed function, adjustable anti-pinch protection and automatic seal relief ensure safe and long-lasting operation.FeaturesPLP chain drive for smoke and heat extraction (RWA) and ventilation systems24 V DC operating voltage500 N thrust and tensile force600 mm strokeMounting on window frame or sash profileProgrammable via Powerline (PLP) and D+H SCS softwareHigh-speed function for smoke and heat extractionPassive and active anti-pinch protectionAutomatic seal reliefConnection possible on the left or rightTechnical dataOperating voltage: 24 V DC (±15 %)Current consumption: 1.4 ADuty cycle: 30 % (3 mins ON / 7 mins OFF)Pushing and pulling force: 500 NStroke length: 600 mmOpening speed: 11.8 mm/sTravel speed UP (RWA): 13.3 mm/sTravel speed DOWN: 11.8 mm/sProtection class: IP32Temperature range: -15 °C to +75 °CHousing: Aluminium, powder-coatedDimensions (W × H × D): 546 × 40 × 59 mmScope of supplyD+H KA 54/600 PLP chain drive2.5 m silicone connection cableInstruction manual

The D+H KA 54/800 is a PLP chain drive for the electrically motorised opening and closing of windows and hatches. With 24 V DC, a pushing and pulling force of 500 N and a stroke of 800 mm, the drive is suitable for smoke extraction in accordance with DIN EN 12101-2 as well as for daily natural ventilation.Installation is carried out on the window frame or sash profile. Thanks to microprocessor-controlled motor electronics, all functions can be individually configured via Powerline (PLP) and the D+H SCS software. A high-speed function, adjustable anti-pinch protection and automatic seal relief ensure safe and long-lasting operation.FeaturesPLP chain drive for smoke and heat extraction (RWA) and ventilation systems24 V DC operating voltage500 N thrust and tensile force800 mm strokeMounting on window frame or sash profileProgrammable via Powerline (PLP) and D+H SCS softwareHigh-speed function for smoke and heat extractionPassive and active anti-pinch protectionAutomatic seal reliefConnection possible on the left or rightTechnical dataOperating voltage: 24 V DC (±15 %)Current consumption: 1.4 ADuty cycle: 30 % (3 mins ON / 7 mins OFF)Pushing and pulling force: 500 NStroke length: 800 mmOpening speed: 11.8 mm/sTravel speed UP (RWA): 13.3 mm/sTravel speed DOWN: 11.8 mm/sProtection class: IP32Temperature range: -15 °C to +75 °CHousing: Aluminium, powder-coatedDimensions (W × H × D): 646 × 40 × 59 mmContentsD+H KA 54/800 PLP chain drive2.5 m silicone connection cableInstruction manual

The D+H KA-BS046-VFI is a universal bracket set for surface-mounted installation of D+H KA chain drives on inwards-opening windows. It is fitted to the window frame and ensures secure and precise mounting of the drive.The bracket set is suitable for a wide range of window profiles and forms part of the tested D+H system solutions for natural ventilation and smoke and heat extraction systems (RWA). All fasteners required for installation are included in the scope of delivery. Instructions for correct installation can be found in the D+H application drawings and product information. :contentReference[oaicite:0]{index=0}FeaturesBracket set for D+H KA chain drivesSurface-mounted installation on the window frameFor inwards-opening windowsUniversal applicationTested system solution for smoke and heat extraction and ventilation applicationsIncludes all necessary fixing materialsTechnical dataInstallation type: Surface-mounted frame installationWindow type: Inwards-openingApplication: Frame mountingScope of supplyD+H KA-BS046-VFI bracket setComplete fixing set

The D+H KA-BS002-VFO is a specially developed bracket set for surface-mounted installation of D+H KA chain drives on outwards-opening roof windows. The bracket set is optimally matched to selected profile systems and enables secure and precise fixing of the drive. :contentReference[oaicite:1]{index=1}The bracket set is designed for the window profiles Gutmann S70 Roof, Raico WING 105D and Wicona WICTEC 50/60. It forms part of the tested D+H system solutions for natural ventilation and smoke and heat extraction systems (RWA). All necessary fixing materials are included in the scope of delivery. Installation instructions can be found in the D+H application drawings and product information. :contentReference[oaicite:2]{index=2}FeaturesBracket set for D+H KA chain drivesSurface-mounted installation on outwards-opening roof windowsOptimised for Gutmann S70 roof windowsOptimised for Raico WING 105DOptimised for Wicona WICTEC 50/60Tested system solution for smoke and heat extraction (RWA) and ventilation applicationsIncludes all necessary fixing materialsTechnical dataInstallation type: Surface-mounted installationApplication: Outward-opening roof windowsCompatible profile systems: Gutmann S70 Roof, Raico WING 105D, Wicona WICTEC 50/60Scope of supplyD+H KA-BS002-VFO bracket setComplete fixing set

The SENTIR mat 14-1T4.0-NP is a high-quality safety contact mat from ASO Safety for surface monitoring on machines, robots and automated systems. Even slight movements are reliably detected.   Key features: Robust PUR moulded construction with non-slip dotted surface Size: 500 x 1,000 mm (plus ramp rail) With moulded ramp rail (30 mm) Fast response time < 25 ms for maximum protection Dust and water jet protected (IP65) for industrial use High load capacity up to 2000 N – ideal for harsh production environments Simple plug & play installation via pre-assembled M8 connectors (male/female) Switching pressure: approx. 150 N (test body Ø 80 mm) Inactive edge: 42 mm Expandable: series connection of several mats up to a total area of 10 m². For flush installation, the ramp rail can be easily cut off at the specified cutting gap.   ✅ Ideal for: robot cells, machining centres, packaging machines, assembly and production lines.  For surface monitoring, control tasks and signal transmission in industrial plants, machine environments or automated workstations.

The ASO Connection Set 4.3 is used to connect an ASO SENTIR mat contact mat to the corresponding control unit.   The 8.2 kOhm terminating resistor included in the set is connected to the free end of the mat or, in series connections, to the last contact mat.   The 5 m long connection cable connects the contact mat to the control unit. It is equipped with an M8 connector (female) on one side and open cable ends on the other side for direct connection to the control unit.

The ASO Connection Set 4.4 is used to connect an ASO SENTIR mat contact mat to the corresponding evaluation electronics.   The set consists of two high-quality 5 m connection cables (2-wire) with M8 connectors in male and female versions. It is ideal for the safe and quick connection of ASO SENTIR mat contact mats.   The robust design ensures reliable signal transmission and easy installation in safety-relevant areas.

Terminating resistor for ASO Safety safety contact mats SENTIR Mat   M8 plug (3-pin) with 8.2 kOhm resistor

Connection cable for ASO Safety safety contact mats SENTIR Mat Length 5000 mm, with M8 connector (male, 2-pin) on one end and open cable ends (2-wire) on the other end.

Extension cable for ASO Safety safety contact mats SENTIR Mat Length 2500 mm, with M8 connector (male and female, 2-pin)

Hormann Art. Nr. 159058, Light barrier WS / WE27-2F450 heatable, complete with mounting bracket and reflector

Safety sensor for doors and windows, set contains 2 x Laser-Scanner (left- and right-hand installation), complete monitoring of the detection zone (70 laser points) and the pinch zone (100 laser points), max. range 4m, color silverDescription:The BEA LZR® FLATSCAN SW uses laser technology time-of-flight measurement) to monitor automatic swing doors. Full protection of the doors is guaranteed by 170 measurement points. One single FLATSCAN SW Module is enough to secure the entire door wing as well as the hinge and the area directly to the side of the closing edge.The LZR FLATSCAN can be used for monitoring as a pair (e.g. in swing doors), or as a single sensor (e.g. in windows). Properties:Maximum detection range of 4m (diagonal) with reflectivity of 2% (i.e. at 1.5m -> max. H = 3.7 m).Possible monitoring of the closing edgeCompact design (8.5 cm x 14.2 cm), can be integrated into any doorWorks with all floor types ((slatted floors, wire mesh, absorbent carpets, reflective flooring, slippery surfaces, etc.) and with the doors' surroundings (handrails, walls, radiators, dustbins, etc).One module per side is enough to secure the door wings as well as its hinges.Useable as a pair (i.e. for doors) or on its own (i.e. for windows).

Hormann Art. Nr. 638464, light curtain HLG-550, transmitter, length 550 mm; 01.04.2014 -

Rubber profile for optical sensing edges, coil of 50m, material EPDM

Hormann Art. Nr. 4981104, Radar motion detector MWD-C; Note: Order the connection cable or connecting cable separately.

Hormann Art. Nr. 46152, Optical sensor receiver BR 30; Production period 01.07.1998 -Description:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.

Rubber profile for optical sensing edges, coil of 5m, material EPDM

Hormann Art. Nr. 4990546, light curtain ILG, 510 mm height with 10 m cable

Rubber profile for optical sensing edges, coil of 5m, material EPDM

Hormann Art. Nr. 637545, Induction loop detector DI 1-Pro; Production period 01.07.2007 -

Record RSM 127 FS Smoke detector module for the control of hold-open devices and fire and smoke protection doors; included in delivery: power supply unit, optical smoke detector, electronics board with connection for the locking mechanism (magnet), release mechanism (push-button) as well as external smoke or thermal switches; housing with stainless steel cladding, 200 x 85 x 124 mm (L x H x D).