Other

For KD 05, KD 20, KD 30, KD 50, KD 60 and KD 70. For MDF 05, MDF 20, MDF 30, MDF 50, MDF 60 and MDF 70. For MTZ 05, MTZ 20, MTZ 30, MTZ 50, MTZ 60 and MTZ 70. For SDO 05 and SDO 35. For STA HD with ribbed motor. Contents:Emergency crank housingSpiral tension pinFixing screwsMicroswitchEmergency crank

For STA 04 and STA 1. Contents:STA emergency crank housingMicroswitch with 450 mm cableSwitch mountCable glandScrew setSpiral tension pin 4x18 mmStandard emergency crank

Emergency hand chain deflection for horizontal mounting, for STA 1 KE. For STA 1 with emergency hand chain (KE). Scope of delivery:Deflection with rollerMounting hardware

For STA, FDO, FTA, KD 05/20/30/50, MDF 05/20/30/50, MTZ 05/20/30/50 drives. Scope of delivery:Crank

For DF 10 and DF 20. Scope of delivery:Microswitch DF 10/20Limit switch bracketScrew setSpiral tension pin 4x20 mm

For DF 30 and DF 40. Scope of delivery:MicroswitchEmergency crank housing4 screws 4x16 mmSpiral clamping pin 4x18 mm

230 V/2,000 VA emergency power buffer in housing. For STA 1 and MDF 05 drives with CS 320 FU control. Scope of delivery:Emergency power buffer with integrated charge controllerFeatures:In the event of a mains power failure, the emergency power buffer system switches on automatically and supplies power to the door control unit and drive. As soon as mains power is restored, the door control unit and drive are powered by the mains again and the emergency power buffer’s batteries are chargedSimple commissioning based on the plug-and-play principle: the battery buffer and door control unit are connected directly via Schuko plugs. No additional control cable is required between the battery and the door control unitWith a fully charged battery, one gate cycle can be guaranteed over a period of one hour

For D 20 and DF 20. Contents:D20 emergency angle gear, completeMicroswitchScrew set

For VTA. Contents:Circuit boardMS-Bus connection cable, 250 mm

For Comfort TU500, TU600, TU800 and TU900. Scope of delivery:Circuit board

For Comfort SU700M, SU1100M and SU1200M. For Parc PA4 and PA68. Contents:Circuit board

For Comfort SU500F and Parc PA3F. Contents:Circuit board

For Comfort 390 plus. Contents:Circuit board

For Comfort 257.2 with Control vario. Contents:Circuit board

For Comfort 560. Contents:Circuit board

For Comfort 880 and 881. Contents:Circuit board

For Control x.base. Contents:Circuit board

For FS 345. Contents:Circuit boardTerminal set

For FS 345 HY. Contents:Circuit boardTerminal set

For RS 300 V, RS 300 K, RS 301 V and RS 301 K. Contents:Circuit boardTerminal set

For VTA. Contents:Circuit board

For VTA worldwide except USA. Scope of delivery:Circuit boardTerminal block setShort-circuit plug for CS push-button connection

Scope of delivery:Contactors

For Comfort 515 from May 2016. Scope of delivery:Spindle unitSpur gear for motorAdapter sleeve for motor