Other

Scope of delivery:BrakeFriction disc FDW10Oil seal DIN 3760 14x32x7 mmDriver FDW10 14 mmDriver FDW10 19 mmKey DIN 6885 5x5x15 mmKey DIN 6885 6x5x15 mmSeeger ring DIN 471 A14Seeger ring DIN 471 A193 screws DIN 912 M5x50 mm3 sealing rings DIN 7603 Form A 5x9x1 mm CU

For single-phase controls CS 310 FU-E and CS 320 FU-E. Scope of delivery:Brake module

For 3-phase controls CS 310 FU-E and CS 320 FU-E. Scope of delivery:Brake module

Handheld programmer with backlit LCD and 3 m cable, MS-Bus. For Comfort 260 (accu/speed), 270 (speed), 280, 360, 370, 380 and 390 (plus). For Control x.52, x.82 and VTA. Scope of delivery:Handheld programmer with connection cable, 3,000 mmFeatures:Programming and operation from a comfortable working positionDisplay and modification of all parameters in quick and special programming on the backlit LCD display

For CS-Mini, CS-Standard, CS-Combi and CS-Maxi housings. Contents:2 push-fit threaded sleeves 4 to 6 mm2 push-fit threaded sleeves 6 to 9 mm2 push-fit threaded sleeves 9 to 12 mm2 blind caps for push-fit threaded sleeves

For MDF 20 to 70 with a switched DC brake. For KD 20 to 70 with switched DC brake. For MTZ 05 to 70 with switched DC brake. For SDO 15 to 35 with switched DC brake. Scope of delivery:Full-wave rectifier

For CS 320 and CS 320 Lite. Scope of delivery:Electronics coverMains connection cover

MS-Bus expansion module with 4 inputs and 4 outputs and track control, DIN-rail mount, with 0.2 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370, 380, 390 (plus), Control x.52, x.82 and VTA. Scope of delivery:Expansion moduleMS-Bus RJ14 connection cable, 200 mmFeatures:Integrated traffic control for two-way traffic operation4 programmable potential-free inputs for push-buttons (NO)4 programmable potential-free relay contacts for 2 red/green traffic lights or additional signalling devices (changeover contacts)Status and diagnostic messages via LEDMounting on a top-hat rail

MS-Bus expansion module with 2 programmable relays, DIN-rail mount, with 0.14 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370, 380, 390 (plus), Control x.52, x.82 and VTA. Contents:Expansion moduleMS-Bus RJ14 connection cable, 140 mmFeatures:2 programmable potential-free relay outputs (changeover contacts)Status and diagnostic messages via LEDMounting on a DIN rail

MS-Bus expansion module with 2 programmable relays in a CS mini housing, including 3 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370, 380, 390 (plus), Control x.52, x.82 and VTA. Scope of delivery:Expansion module pre-assembled in CS mini housingConnection cable MS-Bus 4-pin/MS-Bus RJ14, 3,000 mmMounting hardwareFeatures:2 programmable potential-free relay outputs (changeover contacts)Status and diagnostic messages via LEDMounting on a DIN railWeather-resistant housing

MS-Bus expansion module with 4 inputs and 4 outputs (e.g. for two-way traffic control) in a CS mini housing, including 3 m MS-Bus cable. For CS 265 and CS 320. Scope of delivery:Expansion module pre-assembled in CS mini housingConnection cable MS-Bus 4-pin/MS-Bus RJ14, 3,000 mmMounting hardwareFeatures:4 programmable inputs4 programmable potential-free relay contactsStatus and diagnostic messages via LEDMounting on a top-hat railWeather-resistant housing

EM 173 Expansion module with 4 inputs/outputs for home automation, for DIN-rail mount, including 0.2 m MS-Bus cable with RJ14 plug. For Comfort 260 (speed), 270 (speed), 280, 360, 370 and 380. Contents:Expansion moduleMS-Bus RJ14 connection cable, 200 mmFeatures:3 dry contacts for controlling open, close and intermediate position (ventilation position)1 dry contact for interrupting the hold circuit (e.g. whilst on holiday)3 dry relay contacts for signalling end position OPEN, CLOSED and intermediate position (ventilation position)1 potential-free relay contact for signalling an interrupted photo eye (e.g. to detect a problem during remote closing)Status and diagnostic messages via LEDMounting on a DIN rail

EM 173 expansion module with 4 inputs/outputs for home automation in a CS mini housing, including a 3 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370 and 380. Scope of delivery:Pre-assembled expansion module in CS mini housingMS-Bus 4-pin to MS-Bus RJ14 connection cable, 3,000 mmMounting hardwareFeatures:3 dry contacts for controlling open, close and intermediate position (ventilation position)1 dry contact for interrupting the hold circuit (e.g. whilst on holiday)3 dry relay contacts for signalling end positions OPEN, CLOSED and intermediate position (ventilation position)1 potential-free relay contact for signalling an interrupted photo eye (e.g. to detect a problem during closing remotely)Status and diagnostic messages via LEDMounting on a top-hat railWeather-resistant housing

MS-Bus expansion module with connection for photo eye and Opto 100 optical sensors, including system cabling, DIN-rail mount, with 0.14 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370, 380, 390 (plus) and VTA. Scope of delivery:Expansion moduleMS-Bus RJ14 connection cable, 140 mmFeatures:1 programmable input for photo eyes with system cabling1 programmable input for OPTO 100 optical sensors with system cablingStatus and diagnostic messages via LEDMounting on a DIN rail

MS-Bus expansion module with connection for 2-wire photo eye and Opto 300 optical sensors or 8.2 kOhm sensing edge, active in the CLOSED direction, DIN-rail mount, with 0.14 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370, 380, 390 (plus) and VTA. Contents:Expansion moduleMS-Bus RJ14 connection cable, 140 mmFeatures:1 programmable input for photo eyes with 2-wire cabling1 programmable input with a resistive signal processing unit and an OSE signal processing unit for 8.2 kOhm sensing edges or OSE optical sensors (12 V DC/max. 0.05 A)Status and diagnostic messages via LEDDIN-rail mount

MS-Bus expansion module with connection for 2-wire photo eye and Opto 300 optical sensors or 8.2 kOhm sensing edge, active in the OPEN direction, DIN-rail mount, with 0.14 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370, 380, 390 (plus) and VTA. Contents:Expansion moduleMS-Bus RJ14 connection cable, 140 mmFeatures:1 programmable input for photo eyes with 2-wire cabling1 programmable input with resistive and OSE signal processing unit for 8.2 kOhm sensing edges or OSE optical sensors (12 V DC/max. 0.05 A) in the OPEN directionStatus and diagnostic messages via LEDDIN-rail mount

MS-Bus expansion module with connection for 2 OSE/PNP/relay safety devices, in CS mini housing, with 3 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370, 380, 390 (plus), VTA, CS 265 and CS 320. Scope of delivery:Expansion module pre-assembled in CS mini housingMS-Bus 4-pin/MS-Bus RJ14 connection cable, 3,000 mmMounting hardwareFeatures:2 programmable inputs with testing for anti-trap devices with OSE/PNP/relay connection (24–30 V DC/max. 0.2 A)Automatic detection of the connected systemActivation selectable in OPEN or CLOSE directionSupply voltage of the pull-in protection selectable (12/24 V DC)Status and diagnostic messages via LEDMounting on a top-hat railWeather-resistant housing

MS-Bus expansion module with connection for an OSE light curtain, in a CS mini housing, with 9.5 m MS-Bus cable. For Comfort 260 (speed), 270 (speed), 280, 360, 370, 380, 390 (plus) and VTA. Scope of delivery:Expansion module pre-assembled in CS mini housingMS-Bus RJ14 connection cable, 9,500 mmMounting hardwareFeatures:One programmable input with an OSE signal processing unit and function logic for OSE light curtains (12/24 V DC/max. 0.6 W)Connection of a second OSE light curtain using a second EM module. Both modules can be housed in a CS mini-enclosure and operated in series on the controlStatus and diagnostic messages via LEDMounting on a DIN railWeather-resistant housing

For DF. Scope of delivery:Limit switch assemblyBevel gear, 15 teethFixing screws

For sizes 20, 30, 50, 60 and 70. Scope of delivery:Limit switch housingLimit switch circuit boardMounting hardwareTerminal block 1 to 6 for limit switchesTerminal block 7 to 12 for limit switchesTerminal block 13 to 18 for limit switches

For MDF 2, MDF 3, MDF 4, MDF 5 and MDF 6. For KD 1, KD 2, KD 3 and KD 4. For MTZ 2, MTZ 3, MTZ 4, MTZ 5 and MTZ 6 up to model year 2012. Scope of delivery:Limit switch assemblyBevel gear, 15 teethFixing screws

For MDF from 2012 onwards. For KD from 2012 onwards. For MTZ 20-70 from 2012 onwards. Contents:Limit switch housing, completeFlange for cable entrySeal for cable entryEarthing cableFixing screwsConnector plug for motor cable

For STA 04 and STA1. For MDF 05. For MTZ 05. For KD 05. Scope of delivery:CoverFixing screws

For STA 1. Scope of delivery:Limit switch cassetteFixing screws