GfA Elektromaten TS 93.13 Door Control Unit
€0.00
Product information "GfA Elektromaten TS 93.13 Door Control Unit"
The GfA Elektromaten TS 93.13 is a modern door control unit from the new TS-C generation for industrial door systems. Developed as the successor to the TS 971, it combines proven functions with advanced communication and convenience features.
The control unit is suitable for GfA ELEKTROMATEN with a digital limit switch (DES) and, with an optional adapter, for operators with mechanical limit switches (NES).
The TS-C generation control units are internet-enabled via Wi-Fi or, optionally, via an integrated LTE/NB modem. They can also be configured using the evodo Toolkit app. In addition, the new control units support over-the-air updates, allowing software updates to be installed via the evodo Sync Service app.
Highlights of the TS 93.13
-
Integrated 868 / 434 MHz radio receiver
-
Wi-Fi enabled
-
24 V output for external devices with 0.35 A
-
1 DIF interface for expansion with accessory modules
-
2 potential-free relay contacts
-
Support for safety edges / light curtains
-
Bluetooth communication via mobile devices
-
Real-time logging of all operations
-
Software updates via the evodo Sync app
-
Configuration via the evodo Toolkit app
-
Access code to protect against unauthorized configuration
Technical Data
-
Supply voltage:
-
1N~ 190–240 V
-
3~ 190–240 V
-
3/3N~ 360–415 V
-
-
Operating frequency: 50 / 60 Hz
-
Max. output power for door operator: 3 kW
-
Protection rating: IP65
-
Temperature range: -10 °C to +50 °C
-
Operating humidity: max. 93% (non-condensing)
-
Dimensions (W × H × D): 175 × 390 × 90 mm
Functions
The TS 93.13 offers various operating modes:
-
Dead-man or self-hold operation
-
Direct adjustment of all functions via display and rotary selector
-
Change of direction of rotation via keypad
-
Status and information display
-
Cycle counter and maintenance cycle counter
-
Adjustable force monitoring for sectional doors (DES)
Additional modern convenience functions include:
-
Integrated real-time clock with global time zones
-
Intelligent energy-saving function
-
Weekly timer
-
Wi-Fi functionality
-
Selection of various web services
-
Configurable inputs for special functions such as timed closing or smoke and heat exhaust (RWA)
Equipment & Connection Options
-
Connection of external devices via lever terminals
-
Connection for 2-wire photocells
-
Plug-in connection cable to the ELEKTROMATEN
-
Connection for 4-pole spiral cables
-
Safety reversing contactor with a second independent cut-off path
-
Operation via display and rotary selector
The TS 93.13 is ideal for modern industrial doors with advanced requirements for connectivity, ease of operation and flexible expandability.
The TS 93.13 door control unit is expected to be launched from the fourth quarter of 2026.
| Max. Operating Temperature: | +50 °C |
|---|---|
| Min. Operating Temperature: | -10 °C |
| Modes of Operation: | Automatic, Hold-to-Run |
| Output: | 2x Relay |
| Protection Class: | IP 65 |
| Radio Function: | integrated |
| Sensor Inputs: | Airwave Switch, Light curtain, Optical Sensing Edges, Photo Eye, Radar Motion Sensor, Resistive Sensing Edge (8k2), pulse input |
| Supply Voltage: | 1N~230 V, 3N~400 V, 3~230 V |
Login
Other customers also bought
Door control unit TS 971 for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, with integrated radio systemDescription:The door control unit TS 971 by GfA Elektromaten is an automatic control panel for use with GfA Elektromaten drives with digital (DES) or mechanical (NES) limit switch system. The TS 971 control panel comes with an integrated radio receiver for 434 MHz radio products of different manufacturers. In addition, the TS 971 has an integrated receiver, that can be used for the wireless transmission of the door safety edge in combination with the optional WSD module.Properties:Protection class IP54 with CEE plug or IP65 for direct wiringIntegrated push button for UP-STOP-CLOSE commandsIntegrated radio receiver for 434 MHz wireless productsParameter setting via selector switch with digital displayTwo independent, programmable relay contact, e.g. for red-green traffic-lightsOperating modes: hold-to-run or self-hold/ automatic modeAutomatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)Automatic timer-to-closeAdjustable intermediate open position, e.g. half open, venting positionAutomatic ground adjustment (only DES) to compensate for rope-stretch or subsequent change in ground heightDue to the pre-assembled, pluggable motor cable, the TS 971 can easily be connected to the drive. A faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition to the motor cable, the TS 971 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.The TS 971 by GfA Elektromaten comes with the function "radio/ wireless" already integrated, the control panel has an integrated receiver for remotes from different manufacturers using a frequency of 434 MHz. An additional radio receiver is not needed. In addition the wireless sensing edge transmission system WSD is already integrated on the control panel side. The WSD system is a wireless transmission system for sensing edges and allows monitoring and transmission of the most common sensing edge types, as well as pedestrian door and rope tension switches. The use of a coil cord is no longer needed. Of course the TS 971 also allows for connection with a coil cord.The TS 971 has comfort functions and allows installation in more demanding applications. For standard-applications GfA Elektromaten offers the panel type TS970.
Alternative article
Door control unit TS 971 for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, with integrated radio systemDescription:The door control unit TS 971 by GfA Elektromaten is an automatic control panel for use with GfA Elektromaten drives with digital (DES) or mechanical (NES) limit switch system. The TS 971 control panel comes with an integrated radio receiver for 434 MHz radio products of different manufacturers. In addition, the TS 971 has an integrated receiver, that can be used for the wireless transmission of the door safety edge in combination with the optional WSD module.Properties:Protection class IP54 with CEE plug or IP65 for direct wiringIntegrated push button for UP-STOP-CLOSE commandsIntegrated radio receiver for 434 MHz wireless productsParameter setting via selector switch with digital displayTwo independent, programmable relay contact, e.g. for red-green traffic-lightsOperating modes: hold-to-run or self-hold/ automatic modeAutomatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)Automatic timer-to-closeAdjustable intermediate open position, e.g. half open, venting positionAutomatic ground adjustment (only DES) to compensate for rope-stretch or subsequent change in ground heightDue to the pre-assembled, pluggable motor cable, the TS 971 can easily be connected to the drive. A faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition to the motor cable, the TS 971 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.The TS 971 by GfA Elektromaten comes with the function "radio/ wireless" already integrated, the control panel has an integrated receiver for remotes from different manufacturers using a frequency of 434 MHz. An additional radio receiver is not needed. In addition the wireless sensing edge transmission system WSD is already integrated on the control panel side. The WSD system is a wireless transmission system for sensing edges and allows monitoring and transmission of the most common sensing edge types, as well as pedestrian door and rope tension switches. The use of a coil cord is no longer needed. Of course the TS 971 also allows for connection with a coil cord.The TS 971 has comfort functions and allows installation in more demanding applications. For standard-applications GfA Elektromaten offers the panel type TS970.