Automation Set for Sectional Doors GfA Elektromaten with Accessories
€0.00
delivery time: 3-5 working days
Product information "Automation Set for Sectional Doors GfA Elektromaten with Accessories"
Set for automating industrial sectional doors, contains: GfA Elektromaten drive SE9.24-25.40 SK DES, GfA Elektromaten door control unit TS970 with CEE plug, 5m motor cable, torque-support bracket, Orion key switch APB 1-2T, emergency stop switch, FRABA VITECTOR optical sensing edge set transmitter + receiver, IP65 eletrical box with status LED for OSE, coil cord 5x0,25mm², relfective photo eye with 7m range
Description:
The automation set for industrial sectional doors (i.e. factories, warehouses, logistics centres, etc.) contains all the components needed to automate the opening and closing of doors. The collection of components is made up of items from renowned brands such as GfA Elektromaten, FRABA VITECTOR, Orion, etc. For detailed information on all the components, such as data sheets, instructions for use, etc. click on the components tab above this product description.
The set contains:
The GfA Elektromaten TS970 door control unit with a 0.7m pluggable mains cable CEE 3N~400V (5 pol.)
- Automatic control unit for GfA Elektromaten drives with digital limit switch (DES) or mechanical limit switch (NES)
- IP54 protection class
- Integrated push button for UP-STOP-CLOSE commands
- Parameter setting via selector switch with digital display
- Independent, programmable relay contact, e.g. for red-green traffic-lights, ramp release mechanisms
- Operating modes: hold-to-run mode or self-hold/ automatic mode
- Automatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)
- Automatic timer-to-close
- Adjustable intermediate open position, e.g. half open, venting position
GfA Elektromaten SE9.24 SK-DES, sectional door drive with an output torque of 90Nm and an output speed of 24 rpm is a drive for counterbalanced sectional doors.
- Normally installed directly on the door shaft
- With digital limit switch DES, no need to reset the parameters following a power failure
- Emergency manual override with rapid hand chain operator
- Max. door weight 4000N
- Supply voltage 3~230V/400V
Accessories include a 5m long connection cable for connecting the drive to the control unit, as well as a torque support for mounting the operator to the door.
The reflective photo eye for contactless safeguarding of the door opening.
- Range up to 9m
- All-voltage version: Supply voltage AC 24...240V, DC 12...220V
- 2m connection cable
- Relay output (changeover relay)
Optical sensing edge for the protection of the door opening in automatic mode
- FRABA VITECTOR OSE type
- Transmitter (10.5m cable) and receiver (0.5m cable) included in the set
- For direct connection to the GfA TS970 door control unit
Accessories for connecting the optical safety edge from the door leaf to the control unit.
- Junction box with diagnostics board to display the operating mode of the safety edge
- Spiral cable 5x0.25 mm² with a max. extension length of 3,5m
- An emergency stop switch for surface mounting
One key-switch with 2x impulse outputs OPEN-CLOSE to open the door from the outside
| Emergency Operation: | Hand Chain |
|---|---|
| Output Speed: | 24 min^-1 |
| Output Torque: | 90 Nm |
| Supply Voltage: | 3~230/400 V |
Login
Components
reflective photo eye, max. range 9m, supply voltage 24 ... 240 V AC/ 12 ... 240 V DC, signal output: changeover relay, IP67 rated, 2m connection cableDescription:Universal Reflective Photo-eye barrier for contactless protection of industrial doors. The light barrier works on an extremely wide supply voltage range and through the execution of the output signal as a changeover relay (Normally Closed Contact and Normally Open Contact), it is compatible with most door control units.The photo-eye sensor works with visible red lights (630nm wavelength) and has a built-in polarisation filter. Through this, the photo-eye sensor is extremely impervious to external light and is easy to install.Coverage up to 9mUniversal power supply voltage AC 24 to 240V, DC 12 to 220V2m connection leadRelay output (changeover)
Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6502 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.
Coil cord for doors, black, cable configuration: fine-stranded 4x0,25mm², Lif9Y11Y, PP/ TPU Ether, dimensions: left end = 350mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5mDescription:The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf.Properties:Due to the 900mm-long spiral block, the coil cable can be extended to a length of up to 3.5mThe 4-core cable installation and a 0.25mm² conductor cross-section means the coil cord has enough strands for e.g. the safety edge and slack-rope switches.Can be installed universally on doors from various manufacturers
Electrical box with status LED, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:Dimensions: 40 x 136 x 56 mmTransparent coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts
Push-button, wall-mount, emergency stop switch
Key-switch in wall-mount aluminium enclosure, IP55 rating, 2-sided impulse switch, up/ down function, with cylinder lock and 3 keysDescription:Key-switch in wall-mount aluminium housing IP55 ratingimpulse switchwith cylinder lock and 3 keysavailable in various designs
Drive set for counter-balanced sectional doors, motor torque 90 Nm, 25.4mm hollow shaft, 400 V, set contains: GfA Elektromaten drive SE9.24-25.40 SK DES, GfA Elektromaten door control unit TS970 with CEE plug, 5m motor cable, torque-support bracketDescription:The set of GfA Elektromaten door drive SE9.24 and door control unit TS970 is the perfect choice for automating counter balanced doors. The drive by GfA Elektromaten comes with 90Nm of torque, 24 rpm and with a hollow-shaft diameter of 25.4mm it fits most sectional door types. In case of a power loss, the door can be operated by using the hand chain attached to the drive unit. The set also contains the door control unit TS970, for automatic or constant pressure to close operation. For connection of the drive to the door control, a 5m connection cable is included.Properties:Drive for counter-balanced doors GfA Elektromaten SE9.24Integrated digital limit switch DESEmergency operation via hand chainConnection cable with 5m lengthDoor control unit TS970