MFZ Marantec Ovitor Door Control CS 310 Standard Housing 230V/1PH
€0.00
Product information "MFZ Marantec Ovitor Door Control CS 310 Standard Housing 230V/1PH"
Door control unit for MFZ/Ovitor drives with digital limit switch AWG or mechanical limit switch, in PVC-housing
Description:
Please note:
This product has been discontinued by the manufacturer and is no longer available.
In the "follow-up articles" tab you can find a link to the suggested replacement product.
| Additional Functions: | Partial Opening, Timer-to-Close |
|---|---|
| Max. Operating Temperature: | +45 °C |
| Min. Operating Temperature: | -10 °C |
| Modes of Operation: | Automatic, Hold-to-Run |
| Programmable Relay Contact: | 4 |
| Protection Class: | IP 65 |
| Radio Function: | Optional |
| Sensor Inputs: | Airwave Switch, Optical Sensing Edges, Photo Eye, Resistive Sensing Edge (8k2) |
| Supply Voltage: | 1N~230 V |
Login
Accessories
For use with the control unit CS 310/ 320, timeswitch for application in eg. Underground parking facilities, disrupts the automatic timer-to-close function during individually programmed timeslots
Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), for shutdown of the drive system in an emergency
Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for control voltage
Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for power supply voltage
Selector to switch operation mode between Summer and Winter operation, for installation in CS310/ 320 standard- and combi-housing lid (delivery without lid)
Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm², Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers
Electrical box with status LED, 90 x 48,5 x 40mm, with 1x M16 cable gland, 1x blind plug and 1x M16 cable gland with bend protectionDescription:The Fraba Vitector small junction box is distinguished by its compact design. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:90 x 48,5 x 40mm1 x M16 open in the ground1 x pre-shaped for the ground1 x M16 open in the lidIncludes 1 x M16 cable gland, 1 blind plug, and 1 M16 with bend protection
Electrical box with status LED, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:Dimensions: 40 x 136 x 56 mmTransparent coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts
Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6502 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.
Motor cable for STA drives, length 5m, also compatible to drive series KD 05, MTZ 05, MDF 05 und MWF 05
Other customers also bought
Replacement housing for door controls type CS, manufacturing date from 2014, eg. CS 300 and CS 310, including push-buttons and push-button-PCB
Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), for shutdown of the drive system in an emergency
Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for control voltage
Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for power supply voltage
Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm², Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers
Radio Receiver by MFZ Marantec Ovitor for the door control unit CS 310, pluggable version, frequency 868 MHz
Remote Digital 382 by MFZ Marantec Ovitor, 2-channel, unidirectional, frequency 868 MHz, incl. battery and holder Product details: The Marantec Digital 382 remote control with 868 MHz multi-bit technology offers a simple and reliable solution for controlling Marantec and compatible third-party operators. The remote control has two radio channels with which you can operate up to two door operators. It is ideal for older Garage door openers from the Marantec Comfort range as well as for industrial door control units such as the CS 255, CS 300, CS 310 and CS 320 with radio module.Scope of delivery:- 1 x Marantec Digital 382 remote control 868 MHz - 1 x key ring holder - 1 x remote control holder - 1 x retaining clip for the sun visor - 1 x CR 2032 batteryThanks to its compact design, the Marantec Digital 382 fits comfortably on a key ring or in the car, making it particularly practical to use. It can be easily programmed and connected to various drives.Technical data:- Radio standard: 868.3 MHz multi-bit, unidirectional- Buttons: 2 radio channels- Compatible with Marantec drives (e.g. Comfort 260, 270, 280, 360, 380, 260 accu)
Follow-up articles
Product description: CS 320 industrial door control unit 230V/1ph version from MFZ/Marantec/OvitorThe CS 320 industrial door control unit from MFZ/Marantec/Ovitor serves as a convenient automatic control unit for industrial doors with door operators from MFZ Marantec Ovitor. Specially developed for the operation of rolling, sectional or sliding gates, it fulfils the highest demands and can be operated seamlessly with MFZ/Marantec/Ovitor drives with both mechanical limit switches MEC and digital absolute rotary encoders AWG.Main features of the CS 320 control:Certified according to EN 12453:2017:The CS 320 fulfils the latest safety standards and offers reliable performance in accordance with the requirements of EN 12453:2017.Flexibility thanks to various connection options:The Marantec CS 320 industrial door control unit offers maximum flexibility when connecting to different door operators, allowing customisation to your needs.Add-on modules can be connected via MSBUS:Expand the functionality of the CS 320 by connecting Add-on modules via the MSBUS.Drive control in FI mode:Use the advanced drive control function in Frequency converter mode on compatible drives for efficient and precise control.Plug-in radio system:The CS 320 offers a plug-in radio system for easy expansion for operation with Remote transmitters.LCD display with plain text display:The clear LCD display provides a clear and understandable display of information, making operation and commissioning easier.Illuminated cover keypad:The illuminated cover keypad ensures convenient operation even in poor lighting conditions.Connection options for various sensors:The CS 320 is equipped with connection options for various sensors to ensure optimum safety and functionality.Compatibility with the CS 310 accessory programme:Seamless integration into existing systems thanks to compatibility with the accessory programme of the predecessor control from MFZ/ Marantec, the CS 310. Digital or mechanical limit switch systemsThe CS320 works with the digital limit switch AWG as well as with mechanical limit switches.Variable input voltageThe control can be operated with 1-phase 230V AC or 3-phase 400V AC. The version offered here is pre-wired for operation with 230V/1ph and is supplied with a corresponding CEE plug.CS 320 available in various housingsDiscover the flexibility of the MFZ Marantec CS 320 Ovitor door control unit, which is available in different housing variants to fit seamlessly into your operating environment. The standard housing fulfils the requirements of most installations, for special solutions the control is also available in a larger combi housing. Thanks to the additional installation space and the option of DIN-rail mount, this variant is ideal when additional modules and special accessory components are installed. Choose the door control unit that not only impresses with its performance, but also with its adaptability to different housings.Compatible with various door operatorsThe MFZ Marantec Ovitor CS 320 door control unit is the perfect choice for anyone who needs a reliable control unit for their door systems. Thanks to its wide range of functions and the simple option to expand with additional and wireless modules, the control unit is ideal for many door installations. As the control is suitable for both digital and mechanical limit switch systems, it is also popular for modernising existing systems. In combination with an MFZ Marantec Ovitor operator system, this control unit is a good choice for automating a wide range of door types, whether sectional, roller or sliding gates.
Alternative article
Door control unit for MFZ/Ovitor drives with digital limit switch AWG or mechanical limit switch, in PVC-housing with integrated mains-switchDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Door control unit for MFZ/Ovitor drives with digital limit switch AWG or mechanical limit switch, in PVC-housingDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Door control unit for MFZ/Ovitor drives with digital limit switch AWG or mechanical limit switch, in Large PVC-housing. With integrated DIN-rail for installation of additional control modules.Description:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Door control unit for MFZ/Ovitor drives with digital limit switch AWG or mechanical limit switch, in PVC-housingDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.
Spare parts
Spare part, push-button set for door control units CS300, CS310, CS320 and CS400 from MFZ Marantec Ovitor, incl. connection cable and circuit board
Replacement housing for door controls type CS, manufacturing date from 2014, eg. CS 300 and CS 310, including push-buttons and push-button-PCB