MFZ Marantec Ovitor Door Control CS 320 Lite Standard Housing 400V/3PH

Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), for shutdown of the drive system in an emergency

Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for control voltage

CS 320 door control unit, 400V/3-phase version, from MFZ/Marantec/Ovitor The CS 320 industrial door control unit from MFZ / Marantec / Ovitor serves as a convenient automatic control system for industrial doors fitted with door operators from MFZ, Marantec or Ovitor. Specially developed for the operation of roller, sectional or sliding gates, it meets the highest standards and can be operated seamlessly with industrial door operators featuring either a mechanical limit switch (MEC) or digital absolute rotary encoders (AWG). The Marantec CS 320 is one of the most versatile control solutions for industrial door systems and is suitable for both new installations and the modernisation of existing door control systems. Thanks to its support for digital (AWG) and mechanical (MEC) limit switch systems, the CS 320 door control unit can be flexibly integrated into a wide variety of door systems. Key features of the CS 320 control unit Certified to EN 12453:2017: The CS 320 meets the latest safety standards and delivers reliable performance in accordance with the requirements of EN 12453:2017. Add-on modules can be connected via MSBUS: Expand the functionality of the CS 320 by connecting add-on modules via the MSBUS. Drive control in Frequency converter mode: Take advantage of the advanced drive control function in Frequency converter mode on compatible drives for efficient and precise control. Plug-in radio system: The CS 320 offers a plug-in radio system for easy expansion to enable operation with Remote transmitters. LCD display with plain-text display: The clear LCD display provides a clear and easy-to-understand presentation of information, making operation and commissioning easier. Illuminated keypad: The illuminated keypad ensures comfortable operation even in low-light conditions. Connection options for various sensors: The CS 320 is equipped with connection options for various sensors to ensure optimum safety and functionality. Compatibility with the CS 310 accessory range: Seamless integration into existing systems thanks to compatibility with the accessory range of the predecessor control from MFZ/Marantec, the CS 310. Digital or mechanical limit switch systems: The CS 320 works with both the AWG digital limit switch and mechanical limit switches/mechanical limit switches. Variable input voltage: The control unit can be operated on either single-phase 230 V AC or three-phase 400 V AC. The version offered here is pre-wired for operation at 400 V/3-phase and is supplied with a corresponding CEE plug. The CS 320 door control unit is designed for drives up to 2.2 kW and thus offers sufficient power reserves for numerous industrial applications. CS 320 available in various housings Thanks to its flexible control design, the MFZ Marantec Ovitor CS 320 door control unit is available in various housing variants to blend seamlessly into the respective operating environment. The standard housing meets the requirements of most installations; for specialised solutions, the control is also available in a larger combination housing. Thanks to the additional installation space and the option of a DIN-rail mount, this variant is ideal when additional modules and specialised accessories are to be fitted. This allows the Marantec CS 320 to be optimally adapted to the requirements of industrial, commercial and logistics facilities.   Compatible with various gate operators The MFZ Marantec Ovitor CS 320 door control unit is the perfect choice for anyone requiring a reliable control system for their gate systems. Thanks to its wide range of functions and the ease with which it can be expanded using additional and radio modules, the control unit is suitable for many gate installations. As the control unit is suitable for both digital and mechanical limit switch systems, it is also frequently used in the modernisation of existing systems. In combination with a drive system from MFZ Marantec Ovitor, this control unit is an excellent choice for automating a wide variety of door types, whether sectional, roller or sliding gates. Frequently asked questions about the Marantec CS 320 Can the Marantec CS 320 be used as a replacement for a CS 310? Yes, the Marantec CS 320 is the manufacturer’s recommended successor to the CS 310 door control unit and is frequently used when modernising existing gate systems. As it is compatible with the CS 310’s accessories, it can be used as a replacement solution in numerous applications. Is the CS 320 door control unit compatible with mechanical and digital limit switches? Yes. The CS 320 supports both mechanical limit switches (MEC) and digital absolute rotary encoders (types MFZ/Marantec AWG). This makes the control unit suitable for a wide variety of gate operators and modernisation projects. Is the CS 320 door control unit compatible with all digital limit switches? No. Some manufacturers, such as GfA Elektromaten, Hormann, etc., use digital limit switches with proprietary communication interfaces. These digital limit switches are generally not compatible with the CS 320. The AWG-type digital limit switches from MFZ/Marantec are, of course, compatible with the control unit. For which types of doors is the Marantec CS 320 suitable? The control unit can be used on rolling doors, sectional doors and sliding gates. When used in conjunction with compatible MFZ, Marantec or Ovitor drives, it provides reliable control for industrial door systems. What supply voltage does the CS 320 require? The control unit can be operated at both 230 V and 400 V. The version offered here is designed for 400 V / 3-phase operation and is supplied with a 5-pin CEE plug. However, rewiring to 230 V can be carried out on site by an electrician. Which safety devices can be connected to the CS 320 door control unit? The CS 320 supports, amongst other things, edge sensors, photo eyes, light curtains, pass-door switches, slack-rope switches and radar presence detectors. This enables the requirements of modern industrial gates to be reliably met. Can the Marantec CS 320 be expanded? Yes. Various expansion modules (see accessories) can be connected via the MS-BUS. In addition, a slot is available for a radio module, enabling operation with Marantec’s extensive range of radio control systems.

Radio Receiver by MFZ Marantec Ovitor for the door control unit CS 310, pluggable version, frequency 868 MHz

Remote Digital 382 by MFZ Marantec Ovitor, 2-channel, unidirectional, frequency 868 MHz, incl. battery and holder   Product details: The Marantec Digital 382 remote control with 868 MHz multi-bit technology offers a simple and reliable solution for controlling Marantec and compatible third-party operators. The remote control has two radio channels with which you can operate up to two door operators. It is ideal for older Garage door openers from the Marantec Comfort range as well as for industrial door control units such as the CS 255, CS 300, CS 310 and CS 320 with radio module.Scope of delivery:- 1 x Marantec Digital 382 remote control 868 MHz - 1 x key ring holder - 1 x remote control holder - 1 x retaining clip for the sun visor - 1 x CR 2032 batteryThanks to its compact design, the Marantec Digital 382 fits comfortably on a key ring or in the car, making it particularly practical to use. It can be easily programmed and connected to various drives.Technical data:- Radio standard: 868.3 MHz multi-bit, unidirectional- Buttons: 2 radio channels- Compatible with Marantec drives (e.g. Comfort 260, 270, 280, 360, 380, 260 accu)  

Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for power supply voltage

Door control unit for MFZ/Ovitor drives with digital limit switch AWG or mechanical limit switch, in Large PVC-housingDescription:The CS 320 door control unit from MFZ / Marantec / Ovitor is an automatic comfort control unit for use in industrial doors. It is optimally suited for use in sectional doors, roller shutters and sliding gates and can be used with MFZ / Marantec / Ovitor drives with mechanical limit switch or absolute rotary encoder. For application with drives without a frequency converter, or doors on which fewer accessories are installed, the manufacturer also offers the somewhat more economical CS 320 Lite variant (see "Alternative products").Characteristics of the CS 320:- Automatic comfort controller for industrial doors.- EN 12453:2017 certified- Flexibility due to various connection possibilities- Additional modules available for connection through MSBUS - Variable frequency drive control possible via the FI function on compatible drives- Pluggable wireless system- LCD Display as plain text indicator - Illuminated lid keyboard - Connection possibilities with various sensors- Compatible with the existing accessories programme of the CS 310

CS 320 door control unit, 400V/3-phase version, from MFZ/Marantec/Ovitor The CS 320 industrial door control unit from MFZ / Marantec / Ovitor serves as a convenient automatic control system for industrial doors fitted with door operators from MFZ, Marantec or Ovitor. Specially developed for the operation of roller, sectional or sliding gates, it meets the highest standards and can be operated seamlessly with industrial door operators featuring either a mechanical limit switch (MEC) or digital absolute rotary encoders (AWG). The Marantec CS 320 is one of the most versatile control solutions for industrial door systems and is suitable for both new installations and the modernisation of existing door control systems. Thanks to its support for digital (AWG) and mechanical (MEC) limit switch systems, the CS 320 door control unit can be flexibly integrated into a wide variety of door systems. Key features of the CS 320 control unit Certified to EN 12453:2017: The CS 320 meets the latest safety standards and delivers reliable performance in accordance with the requirements of EN 12453:2017. Add-on modules can be connected via MSBUS: Expand the functionality of the CS 320 by connecting add-on modules via the MSBUS. Drive control in Frequency converter mode: Take advantage of the advanced drive control function in Frequency converter mode on compatible drives for efficient and precise control. Plug-in radio system: The CS 320 offers a plug-in radio system for easy expansion to enable operation with Remote transmitters. LCD display with plain-text display: The clear LCD display provides a clear and easy-to-understand presentation of information, making operation and commissioning easier. Illuminated keypad: The illuminated keypad ensures comfortable operation even in low-light conditions. Connection options for various sensors: The CS 320 is equipped with connection options for various sensors to ensure optimum safety and functionality. Compatibility with the CS 310 accessory range: Seamless integration into existing systems thanks to compatibility with the accessory range of the predecessor control from MFZ/Marantec, the CS 310. Digital or mechanical limit switch systems: The CS 320 works with both the AWG digital limit switch and mechanical limit switches/mechanical limit switches. Variable input voltage: The control unit can be operated on either single-phase 230 V AC or three-phase 400 V AC. The version offered here is pre-wired for operation at 400 V/3-phase and is supplied with a corresponding CEE plug. The CS 320 door control unit is designed for drives up to 2.2 kW and thus offers sufficient power reserves for numerous industrial applications. CS 320 available in various housings Thanks to its flexible control design, the MFZ Marantec Ovitor CS 320 door control unit is available in various housing variants to blend seamlessly into the respective operating environment. The standard housing meets the requirements of most installations; for specialised solutions, the control is also available in a larger combination housing. Thanks to the additional installation space and the option of a DIN-rail mount, this variant is ideal when additional modules and specialised accessories are to be fitted. This allows the Marantec CS 320 to be optimally adapted to the requirements of industrial, commercial and logistics facilities.   Compatible with various gate operators The MFZ Marantec Ovitor CS 320 door control unit is the perfect choice for anyone requiring a reliable control system for their gate systems. Thanks to its wide range of functions and the ease with which it can be expanded using additional and radio modules, the control unit is suitable for many gate installations. As the control unit is suitable for both digital and mechanical limit switch systems, it is also frequently used in the modernisation of existing systems. In combination with a drive system from MFZ Marantec Ovitor, this control unit is an excellent choice for automating a wide variety of door types, whether sectional, roller or sliding gates. Frequently asked questions about the Marantec CS 320 Can the Marantec CS 320 be used as a replacement for a CS 310? Yes, the Marantec CS 320 is the manufacturer’s recommended successor to the CS 310 door control unit and is frequently used when modernising existing gate systems. As it is compatible with the CS 310’s accessories, it can be used as a replacement solution in numerous applications. Is the CS 320 door control unit compatible with mechanical and digital limit switches? Yes. The CS 320 supports both mechanical limit switches (MEC) and digital absolute rotary encoders (types MFZ/Marantec AWG). This makes the control unit suitable for a wide variety of gate operators and modernisation projects. Is the CS 320 door control unit compatible with all digital limit switches? No. Some manufacturers, such as GfA Elektromaten, Hormann, etc., use digital limit switches with proprietary communication interfaces. These digital limit switches are generally not compatible with the CS 320. The AWG-type digital limit switches from MFZ/Marantec are, of course, compatible with the control unit. For which types of doors is the Marantec CS 320 suitable? The control unit can be used on rolling doors, sectional doors and sliding gates. When used in conjunction with compatible MFZ, Marantec or Ovitor drives, it provides reliable control for industrial door systems. What supply voltage does the CS 320 require? The control unit can be operated at both 230 V and 400 V. The version offered here is designed for 400 V / 3-phase operation and is supplied with a 5-pin CEE plug. However, rewiring to 230 V can be carried out on site by an electrician. Which safety devices can be connected to the CS 320 door control unit? The CS 320 supports, amongst other things, edge sensors, photo eyes, light curtains, pass-door switches, slack-rope switches and radar presence detectors. This enables the requirements of modern industrial gates to be reliably met. Can the Marantec CS 320 be expanded? Yes. Various expansion modules (see accessories) can be connected via the MS-BUS. In addition, a slot is available for a radio module, enabling operation with Marantec’s extensive range of radio control systems.

Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), for shutdown of the drive system in an emergency

Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for control voltage

Installation in CS310/ 320 standard- and combi-housing lid (delivery without lid), ON/ OFF Switch for power supply voltage

Selector to switch operation mode between Summer and Winter operation, for installation in CS310/ 320 standard- and combi-housing lid (delivery without lid)

Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm²,  Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m   Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers

Electrical box with status LED, 90 x 48,5 x 40mm, with 1x M16 cable gland, 1x blind plug and 1x M16 cable gland with bend protectionDescription:The Fraba Vitector small junction box is distinguished by its compact design. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:90 x 48,5 x 40mm1 x M16 open in the ground1 x pre-shaped for the ground1 x M16 open in the lidIncludes 1 x M16 cable gland, 1 blind plug, and 1 M16 with bend protection

Electrical box with status LED, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:Dimensions: 40 x 136 x 56 mmTransparent coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts

Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 10,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6502 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 10.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.

Motor cable for STA drives, length 5m, also compatible to drive series KD 05, MTZ 05, MDF 05 und MWF 05

Industrial Door Drive for counter sectional doors, output torque 100 Nm, output speed 30 rpm, hollow shaft diameter 25,4mm, digital limit switch, with emergency hand chain for manual operation, with digital limit switch / absolute rotary encoder AWG, limit switch range 20 rotations max.Description:The drives of the STA/STAW series are ideally designed for counter-balanced sectional doors. This is guaranteed by a special gear with a motor developed to ensure maximum strength in the smallest space. Therefore, the drive is extremely compact, and its casing is very slim.Features:Aluminium die-cast casingRolling worm shaftDual worm shaft bearingThermal protection built into the motor windings230 / 400V / 50 Hz / 3~, custom solutions on requestPlug-in connectors

Industrial Door Drive for counter sectional doors, output torque 110 Nm, output speed 24 rpm, hollow shaft diameter 25,4mm, digital limit switch, with emergency hand chain for manual operation, with digital limit switch / absolute rotary encoder AWG, limit switch range 20 rotations max.Description:The drives of the STA/STAW series are ideally designed for counter-balanced sectional doors. This is guaranteed by a special gear with a motor developed to ensure maximum strength in the smallest space. Therefore, the drive is extremely compact, and its casing is very slim.Features:Aluminium die-cast casingRolling worm shaftDual worm shaft bearingThermal protection built into the motor windings230 / 400V / 50 Hz / 3~, custom solutions on requestPlug-in connectors

Industrial Door Drive for counter sectional doors, output torque 120 Nm, output speed 19 rpm, hollow shaft diameter 25,4mm, digital limit switch, with emergency hand chain for manual operation, with digital limit switch / absolute rotary encoder AWG, limit switch range 20 rotations max.Description:The drives of the STA/STAW series are ideally designed for counter-balanced sectional doors. This is guaranteed by a special gear with a motor developed to ensure maximum strength in the smallest space. Therefore, the drive is extremely compact, and its casing is very slim.Features:Aluminium die-cast casingRolling worm shaftDual worm shaft bearingThermal protection built into the motor windings230 / 400V / 50 Hz / 3~, custom solutions on requestPlug-in connectors

Industrial Door Drive for counter sectional doors, output torque 130 Nm, output speed 15 rpm, hollow shaft diameter 25,4mm, digital limit switch, with emergency hand chain for manual operation, with digital limit switch / absolute rotary encoder AWG, limit switch range 20 rotations max.Description:The drives of the STA/STAW series are ideally designed for counter-balanced sectional doors. This is guaranteed by a special gear with a motor developed to ensure maximum strength in the smallest space. Therefore, the drive is extremely compact, and its casing is very slim.Features:Aluminium die-cast casingRolling worm shaftDual worm shaft bearingThermal protection built into the motor windings230 / 400V / 50 Hz / 3~, custom solutions on requestPlug-in connectors

Industrial Door Drive for counter sectional doors, output torque 110 Nm, output speed 19 rpm, hollow shaft diameter 25,4mm, digital limit switch, with emergency hand chain for manual operation, with digital limit switch / absolute rotary encoder AWG, limit switch range 20 rotations max.Description:The drives of the STA/STAW series are ideally designed for counter-balanced sectional doors. This is guaranteed by a special gear with a motor developed to ensure maximum strength in the smallest space. Therefore, the drive is extremely compact, and its casing is very slim.Features:Aluminium die-cast casingRolling worm shaftDual worm shaft bearingThermal protection built into the motor windings230 / 400V / 50 Hz / 3~, custom solutions on requestPlug-in connectors

Industrial Door Drive for counter sectional doors, output torque 100 Nm, output speed 24 rpm, hollow shaft diameter 25,4mm, digital limit switch, with emergency hand chain for manual operation, with digital limit switch / absolute rotary encoder AWG, limit switch range 20 rotations max.Description:The drives of the STA/STAW series are ideally designed for counter-balanced sectional doors. This is guaranteed by a special gear with a motor developed to ensure maximum strength in the smallest space. Therefore, the drive is extremely compact, and its casing is very slim.Features:Aluminium die-cast casingRolling worm shaftDual worm shaft bearingThermal protection built into the motor windings230 / 400V / 50 Hz / 3~, custom solutions on requestPlug-in connectors

CS 320 door control unit, 400V/3-phase version, from MFZ/Marantec/Ovitor The CS 320 industrial door control unit from MFZ / Marantec / Ovitor serves as a convenient automatic control system for industrial doors fitted with door operators from MFZ, Marantec or Ovitor. Specially developed for the operation of roller, sectional or sliding gates, it meets the highest standards and can be operated seamlessly with industrial door operators featuring either a mechanical limit switch (MEC) or digital absolute rotary encoders (AWG). The Marantec CS 320 is one of the most versatile control solutions for industrial door systems and is suitable for both new installations and the modernisation of existing door control systems. Thanks to its support for digital (AWG) and mechanical (MEC) limit switch systems, the CS 320 door control unit can be flexibly integrated into a wide variety of door systems. Key features of the CS 320 control unit Certified to EN 12453:2017: The CS 320 meets the latest safety standards and delivers reliable performance in accordance with the requirements of EN 12453:2017. Add-on modules can be connected via MSBUS: Expand the functionality of the CS 320 by connecting add-on modules via the MSBUS. Drive control in Frequency converter mode: Take advantage of the advanced drive control function in Frequency converter mode on compatible drives for efficient and precise control. Plug-in radio system: The CS 320 offers a plug-in radio system for easy expansion to enable operation with Remote transmitters. LCD display with plain-text display: The clear LCD display provides a clear and easy-to-understand presentation of information, making operation and commissioning easier. Illuminated keypad: The illuminated keypad ensures comfortable operation even in low-light conditions. Connection options for various sensors: The CS 320 is equipped with connection options for various sensors to ensure optimum safety and functionality. Compatibility with the CS 310 accessory range: Seamless integration into existing systems thanks to compatibility with the accessory range of the predecessor control from MFZ/Marantec, the CS 310. Digital or mechanical limit switch systems: The CS 320 works with both the AWG digital limit switch and mechanical limit switches/mechanical limit switches. Variable input voltage: The control unit can be operated on either single-phase 230 V AC or three-phase 400 V AC. The version offered here is pre-wired for operation at 400 V/3-phase and is supplied with a corresponding CEE plug. The CS 320 door control unit is designed for drives up to 2.2 kW and thus offers sufficient power reserves for numerous industrial applications. CS 320 available in various housings Thanks to its flexible control design, the MFZ Marantec Ovitor CS 320 door control unit is available in various housing variants to blend seamlessly into the respective operating environment. The standard housing meets the requirements of most installations; for specialised solutions, the control is also available in a larger combination housing. Thanks to the additional installation space and the option of a DIN-rail mount, this variant is ideal when additional modules and specialised accessories are to be fitted. This allows the Marantec CS 320 to be optimally adapted to the requirements of industrial, commercial and logistics facilities.   Compatible with various gate operators The MFZ Marantec Ovitor CS 320 door control unit is the perfect choice for anyone requiring a reliable control system for their gate systems. Thanks to its wide range of functions and the ease with which it can be expanded using additional and radio modules, the control unit is suitable for many gate installations. As the control unit is suitable for both digital and mechanical limit switch systems, it is also frequently used in the modernisation of existing systems. In combination with a drive system from MFZ Marantec Ovitor, this control unit is an excellent choice for automating a wide variety of door types, whether sectional, roller or sliding gates. Frequently asked questions about the Marantec CS 320 Can the Marantec CS 320 be used as a replacement for a CS 310? Yes, the Marantec CS 320 is the manufacturer’s recommended successor to the CS 310 door control unit and is frequently used when modernising existing gate systems. As it is compatible with the CS 310’s accessories, it can be used as a replacement solution in numerous applications. Is the CS 320 door control unit compatible with mechanical and digital limit switches? Yes. The CS 320 supports both mechanical limit switches (MEC) and digital absolute rotary encoders (types MFZ/Marantec AWG). This makes the control unit suitable for a wide variety of gate operators and modernisation projects. Is the CS 320 door control unit compatible with all digital limit switches? No. Some manufacturers, such as GfA Elektromaten, Hormann, etc., use digital limit switches with proprietary communication interfaces. These digital limit switches are generally not compatible with the CS 320. The AWG-type digital limit switches from MFZ/Marantec are, of course, compatible with the control unit. For which types of doors is the Marantec CS 320 suitable? The control unit can be used on rolling doors, sectional doors and sliding gates. When used in conjunction with compatible MFZ, Marantec or Ovitor drives, it provides reliable control for industrial door systems. What supply voltage does the CS 320 require? The control unit can be operated at both 230 V and 400 V. The version offered here is designed for 400 V / 3-phase operation and is supplied with a 5-pin CEE plug. However, rewiring to 230 V can be carried out on site by an electrician. Which safety devices can be connected to the CS 320 door control unit? The CS 320 supports, amongst other things, edge sensors, photo eyes, light curtains, pass-door switches, slack-rope switches and radar presence detectors. This enables the requirements of modern industrial gates to be reliably met. Can the Marantec CS 320 be expanded? Yes. Various expansion modules (see accessories) can be connected via the MS-BUS. In addition, a slot is available for a radio module, enabling operation with Marantec’s extensive range of radio control systems.