GfA Elektromaten Door Control TS 970 XL Plastic Housing for direct connection Kit 230 - 400V
€415.00
Product information "GfA Elektromaten Door Control TS 970 XL Plastic Housing for direct connection Kit 230 - 400V"
Door control unit for GfA Elektromaten drives with digital or mechanical limit switch, automatic or constant pressure to close operation, in XL plastic housing, with connection kit for hardwiring
Description:
The GfA Elektromaten TS970 door control unit is an automatic control unit for GfA Elektromaten drives with digital or mechanical limit switches.
Properties:
- Protection rating: IP54
- Integrated 3-button station UP-STOP-DOWN
- control setting via rotation switch and display
- Independently programmable relay contact for use with traffic lights or ramp releases, etc
- Parameter setting via selector switch with digital display
- Independent, programmable relay contact, e.g. for red-green traffic-lights
- Operating modes: hold-to-run mode or self-hold/ automatic mode
- Automatic detection of safety edge type (Optical edge FRABA VITECTOR, resistive edge 8k2 or NC-contact type 1k2 with testing)
- Automatic timer-to-close
- Adjustable intermediate open position, e.g. half open, venting position
Due to the pre-assembled, pluggable motor cable, the TS 970 can easily be connected to the drive. A faulty wiring is hereby avoided, thus minimizing installation errors and time. The connection cable can be wired into the control panel housing from either top or bottom. In addition to the motor cable, the TS 970 can work with a multitude of additional inputs, e.g. rope-switches, photo eyes, sensing edges and many more.
The TS970 by GfA includes most standard-features of a modern door control panel and can therefore be used to operate most industrial doors. For more demanding applications, GfA Elektromaten offers the control panel types TS971 or TS981.
| Additional Functions: | Partial Opening, Timer-to-Close |
|---|---|
| Max. Operating Temperature: | +50 °C |
| Min. Operating Temperature: | -10 °C |
| Modes of Operation: | Automatic, Hold-to-Run |
| Programmable Relay Contact: | 1 |
| Protection Class: | IP 54 |
| Radio Function: | Optional |
| Sensor Inputs: | Airwave Switch, Optical Sensing Edges, Photo Eye, Resistive Sensing Edge (8k2) |
| Supply Voltage: | 1N~230 V, 3N~400 V, 3~230 V |
Login
Accessories
Foot and Palm Switch/ Mushroom Pushbutton, XL button diameter 94mm, IP65, blackDescription:The Foot or Palm Switch, Mushroom Pushbutton with extra large 94mm button is optimally suited for use in industrial environments.Properties:Contact type impulse, Normally Open NO and Normally Closed NCExtra large button diameter 94mmcolour blackProtection Class IP65
Foot and Palm Switch/ Mushroom Pushbutton, XL button diameter 94mm, IP65, redDescription:The Foot or Palm Switch, Mushroom Pushbutton with extra large 94mm button is optimally suited for use in industrial environments.Properties:Contact type impulse, Normally Open NO and Normally Closed NCExtra large button diameter 94mmcolour redProtection Class IP65
Key-switch in wall-mount aluminium enclosure, IP55 rating, 2-sided impulse switch, up/ down function, with cylinder lock and 3 keysDescription:Key-switch in wall-mount aluminium housing IP55 ratingimpulse switchwith cylinder lock and 3 keysavailable in various designs
Pull-switch with spring-supported rope, rope length 2,5m with rubber ball at the end, IP67 rating, with 3 cable entry openings M20x1,5, special switch design allows installation on the wall or ceiling without a need for additional installation equipmentDescription:The pull switch is ideal for ceiling or wall installationsIP 67 protection ratingIncludes 2.5m cord
reflective photo eye, max. range 9m, supply voltage 24 ... 240 V AC/ 12 ... 240 V DC, signal output: changeover relay, IP67 rated, 2m connection cableDescription:Universal Reflective Photo-eye barrier for contactless protection of industrial doors. The light barrier works on an extremely wide supply voltage range and through the execution of the output signal as a changeover relay (Normally Closed Contact and Normally Open Contact), it is compatible with most door control units.The photo-eye sensor works with visible red lights (630nm wavelength) and has a built-in polarisation filter. Through this, the photo-eye sensor is extremely impervious to external light and is easy to install.Coverage up to 9mUniversal power supply voltage AC 24 to 240V, DC 12 to 220V2m connection leadRelay output (changeover)
Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm², Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers
Electrical box with status LED, 40 x 136 x 56 mm, incl. 3x M16 cable glands, 1x M16 cable gland with bend protection and 4x M16 lock nutDescription:The Fraba Vitector large junction box is useful wherever lots of space is needed for cabling from sensors, photo-eye switches, pass-door switches, slack-rope switches, etc. The connection circuit board ensures the cables can be easily connected to the door.Further characteristics:Dimensions: 40 x 136 x 56 mmTransparent coverPre-punched cable entries 5xM16 in the housing, 1xM16 in the lidIncludes 3xM16 cable glands, 1x bend protector and 4 x locknuts
Set Transmitter (Tx) and Receiver (Rx) for Optical Sensing Edge OSE, PVC-cable, cable length 6,5m/0,5m, without plugsDescription:The FRABA VITECTOR OSE-S 6501 sensor set consists of a transmitter (Tx) and a receiver (Rx) for optical sensing edges. For an electrical connection, the sensors are equipped with a top-quality PVC Cable (length: transmitter - 6.5 m and receiver - 0.5m). The sensors are based on the original FRABA OSE technology and provide the well-known OSE-signal, which is implemented in many controllers.Warning:The 4-digit sequence of numbers used on the displays shows the sensor's manufacture date in week / year format. For example, 0118 shows the sensor was produced in the first calendar week (01) of 2018.
tripple push-button, wall-mount, UP/ DOWN/ STOP impulse switch
Push-button, wall-mount, emergency stop switch
Motor cable for GfA Elektromaten drives with digital limit switch DES, length 7m
Motor cable for GfA Elektromaten drives with digital limit switch DES, length 5m
Accessory for GfA Elektromaten controls type TS, for use with smartphone or tablet PC together with the "GfA+" App, for reading out and displaying of important data from the door control (e.g. programming, stored error logs, etc.)
Other customers also bought
GfA Elektromaten polarized reflex photo cell (type: SICK WT280-S230) with reflector and mounting bracket, range 7,5m, protection class IP65, voltage 24 V DC with 1,5m UBS connection cable
Radio receiver EKX1M by GfA Elektromaten, with UBS-connector for installation into GfA Elektromaten door control units TS970/ TS981. Technical properties: frequency 434 MHz, 1 channel, contact rating max. 230V/ 5A, supply voltage 24 VDCDescription:GfA Elektromaten EKX1M Radio receiver suitable for installation in the GfA Elektromaten TS970 / TS981 door control units.Technical characteristics:434 MHz FrequencyUBS plug-in connectorDip-switch codingSwitching contacts max 230V / 5ASupply voltage 24 VDC
Midi radio transmitter SKX1LC by GfA Elektromaten, 1-channel, 434 MHz, coded via dip-switch, includes 12V battery, status LEDDescription:GfA Elektromaten SKX1LC Midi radio transmitter.Technical characteristics:434 MHzcoded via dip-switchincludes 12V batteryLED status display
Coil cord for doors, EstTPU/PP, black, cable configuration: fine-stranded 5x0,25mm², Lif9Y11Y, dimensions: left end = 300mm, coil length = 900mm, right end = 2000mm, max. extension length 3,5m Description: The coil cord was developed especially for use on doors to connect the sensors and switches on the door leaf. Properties: Due to the 800mm-long spiral block, the coil cable can be extended to a length of up to 3.5m. The 5-core cable installation and a 0.25mm² conductor cross-section means the helical cable has enough strands for e.g. the safety edge and slack-rope switches Sheath and core insulation made of high-grade materials Can be installed universally on doors from various manufacturers
Cable set for optical sensing edges OSE, includes coil cord 5x0,25 mm², cable ends 2,0m/ 0,35m, max. extension length 3,5m and IP65 junction box with connection PCB, for connection of OSE sensors (GfA Elektromaten connectors or single leads), with LED for indication of operation statusDescription:The cable set for optical sensing edges consists of:- Pluggable 5-core coil cord, straight cable ends 2,0m/ 0,35m length, can be extended to a max. length of 3,5m - IP65 junction box with connection circuit board for OSE transmitter / receiver