FEIG Electronic TST FUZ2-CX Door Control with Frequency Converter 1.2kW

Plug-In module for FEIG control units, 1 additional relay, changeover contact, max. 230 VAC/ 3A

Extension board to add Inputs/ Outputs on TST FUZ2, TST FUF2 und TST FU3F control units, 6 x relay outputs, 1 x transistor output, serial communication interface

Housing Bottom for door control unit TST WU or FUZ2 by FEIG Electronic

Housing top lid for door control unit TST WU or FUZ2 by FEIG Electronic, version with emergency stop button

Housing top lid for door control unit TST WU or FUZ2 by FEIG Electronic

Loop detector plugin card for FEIG Electronic door control units TST FUS, TST FUZ und TST FUF, for monitoring two loopsDescription:The TST SUVEK2-A plugin-card by FEIG Electronic is a loop detector for plugging into FEIG door controllers. As a two-channel system, the module can monitor two separate induction loops.Properties:Plug-in module for door controls FEIG TST FUS, TST FUZ, TST FUF and all RELCON controlsGalvanic isolation between loop and detector electronicsAutomatic adjustment after power-upConnection via socket strips and plug-in terminalsSetting via DIP switches

Loop detector plugin card for FEIG Electronic door control units TST FUS, TST FUZ und TST FUF, for monitoring one single loopDescription:The TST SUVEK1-A plugin-card by FEIG Electronic is a loop detector for plugging into FEIG door controllers. As a single-channel system, the module can monitor one induction loop.Properties:Plug-in module for door controls FEIG TST FUS, TST FUZ, TST FUF and all RELCON controlsGalvanic isolation between loop and detector electronicsAutomatic adjustment after power-upConnection via socket strips and plug-in terminalsSetting via DIP switches

Housing Bottom for door control unit TST WU or FUZ2 by FEIG Electronic

Housing top lid for door control unit TST WU or FUZ2 by FEIG Electronic, version with emergency stop button

Housing top lid for door control unit TST WU or FUZ2 by FEIG Electronic

Feig Electronic 3-phase frequency converter control unit for doors, supply voltage 3x200 - 480 V, for drives up to 4,0 kW (10A) with electronic or digital limit switch, with 24V (3500mA) power supply for accessories, monitored 24V brake, in large enclosure, with mains switch, includes connection cable with CEE-plugDescription:The door control unit TST FUF3-CH by FEIG Electronic is a controller with built-in frequency converter for drives with up to 4,0kW. The frequency converter allows for soft-start and -stop of the doors, resulting in reduced mechanical wear and longer product lifetime. With an increased opening speed of the door, processes can be optimized and waiting times can be reduced. The unit comes with a 24V/ 3500mA power supply for external accessories, like radar sensors, signal lights etc. It works with digital or mechanical limit switches for door positioning. Due to the very wide range of parameter adjustments offered by all FEIG control units, the TST FUF3-CH can be programmed for many different doors functions. The parameter setting is done by using the push-buttons and full text display of the controller, no additional accessories needed! Installation of the controller is easy and the auto-setting and calibration feature of the controller simplifies it even further as it automatically sets the frequency converter parameters for soft-start and -stop.Properties:Large enclosure with built-in mains switchFrequency converter allows for variable and adjustable door speedsSoft-start and soft-stop featureFor drives up to 4,0kWwide power supply range 3~200 - 480 V ACFulfils the required standards for door controls (TüV, CE)2 integrated interfaces for sensing edges (resitive or optical systems)2 slots for optional plugin-cards, eg. 2-channel radio, 2-channel loop detector or 6-channel safety control cardProgrammable time switchDiagnostic LEDs on all inputsUSB-Interface for service purposesOptional I/O-extension with plugin-card (for 6 inputs, 7 outputs, time switch, 2-channel loop detector, external display, RS485- and CAN-interface)Interface for the optional module TST RFUFxCOM for parallel operation of two doorsPluggable, colour-coded connectors for all control functionsUp to 20 (+6) digital inputs and 3 (+6) relay outputs are set with standard functions as factory default

Feig Electronic 3-phase frequency converter control unit for doors, supply voltage 3x200 - 480 V, for drives up to 2,2 kW (5A) with electronic or digital limit switch, with 24V (3500mA) power supply for accessories, monitored 24V brake, in large enclosure, with mains switch, includes connection cable with CEE-plugDescription:The door control unit TST FUF3-AH by FEIG Electronic is a controller with built-in frequency converter for drives with up to 2,2kW. The frequency converter allows for soft-start and -stop of the doors, resulting in reduced mechanical wear and longer product lifetime. With an increased opening speed of the door, processes can be optimized and waiting times can be reduced. The unit comes with a 24V/ 3500mA power supply for external accessoies, like radar sensors, signal lights etc. It works with digital or mechanical limit switches for door positioning. Due to the very wide range of parameter adjustments offered by all FEIG control units, the TST FUF3-AH can be programmed for many different doors functions. The parameter setting is done by using the push-buttons and full text display of the controller, no additional accessories needed! Installation of the controller is easy and the auto-setting and calibration feature of the controller simplifies it even further as it automatically sets the frequency converter parameters for soft-start and -stop.Properties:Large enclosure with built-in mains switchFrequency converter allows for variable and adjustable door speedsSoft-start and soft-stop featureFor drives up to 2,2kWwide power supply range 3~200 - 480 V ACFulfils the required standards for door controls (TüV, CE)2 integrated interfaces for sensing edges (resistive or optical systems)2 slots for optional plugin-cards, eg. 2-channel radio, 2-channel loop detector or 6-channel safety control cardProgrammable time switchDiagnostic LED on all inputsUSB-Interface for service purposesOptional I/O-extension with plugin-card (for 6 inputs, 7 outputs, time switch, 2-channel loop detector, external display, RS485- and CAN-interface)Interface for the optional module TST RFUFxCOM for parallel operation of two doorsPluggable, colour-coded connectors for all control functionsUp to 20 (+6) digital inputs and 3 (+6) relay outputs are set with standard functions as factory default

Feig Electronic 1-phase frequency converter control unit for doors, supply voltage 110 - 240 V, for drives up to 1,5 kW (10A) with electronic or digital limit switch, with 24V (500mA) power supply for accessories, in large enclosure, with mains switch, includes connection cable with CEE-plugDescription:The door control unit TST FUZ2-LGH by FEIG Electronic is a controller with built-in frequency converter for drives with up to 1,5kW. The frequency converter allows for soft-start and -stop of the doors, resulting in reduced mechanical wear and longer product lifetime. With an increased opening speed of the door, processes can be optimized and waiting times can be reduced. The unit comes with a 24V/ 500mA power supply for external accessories, like radar sensors, signal lights etc. It works with digital or mechanical limit switches for door positioning. Due to the very wide range of parameter adjustments offered by all FEIG control units, the TST FUZ2-LGH can be programmed for many different door functions. The parameter setting is done by using the push-buttons and the segment display of the controller, no additional accessories needed! Installation of the controller is easy and the auto-setting and calibration feature of the controller simplifies it even further as it automatically sets the frequency converter parameters for soft-start and -stop.Properties:Large enclosure with built-in mains switchFrequency converter allows for variable and adjustable door speedsSoft-start and soft-stop featurefor drives up to 1,5kWwide power supply range 110 - 240 V ACFulfils the required standards for door controls (TüV, CE)Integrated interface for sensing edges (resistive or optical systems)Optional plugin card for 2-channel radio system, 2-channel loop detector or 6-channel safety control cardOptional I/O-extension with plugin-card (for 6 inputs, 7 outputs, time switch, 2-channel loop detector, external display, RS485- and CAN-interface)Pluggable, colour-coded connectors for all control functionsUp to 16 digital inputs and 2 relay outputs are set with standard functions as factory default

Feig Electronic 1-phase frequency converter control unit for doors, supply voltage 110 - 240 V, for drives up to 0,75 kW (5A) with electronic or digital limit switch, with 24V (500mA) power supply for accessories, includes connection cable with CEE-plugDescription:The door control unit TST FUZ2-C by FEIG Electronic is a controller with built-in frequency converter for drives with up to 0,75kW. The frequency converter allows for soft-start and -stop oft he doors, resulting in reduced mechanical wear and longer product lifetime. With an increased opening speed oft he door, processes can be optimized and waiting times can be reduced. The unit comes with a 24V/ 500mA power supply for external accessories, like radar sensors, signal lights etc. It works with digital or mechanical limit switches for door positioning. Due to the very wide range of parameter adjustments offered by all FEIG control units, the TST FUZ2-C can be programmed for many different door functions. The parameter setting is done by using the push-buttons and the segment display of the controller, no additional accessories needed! Installation of the controller is easy and the auto-setting and calibration feature of the controller simplifies it even further as it automatically sets the frequency converter parameters for soft-start and -stop.Properties:Frequency converter allows for variable and adjustable door speedsSoft-start and soft-stop featurefor drives up to 0,75kWwide power supply range 110 - 240 V ACFulfils the required standards for door controls (TüV, CE)Integrated interface for sensing edges (resistive or optical systems)Optional plugin card for 2-channel radio system, 2-channel loop detector or 6-channel safety control cardOptional I/O-extension with plugin-card (for 6 inputs, 7 outputs, time switch, 2-channel loop detector, external display, RS485- and CAN-interface)Pluggable, colour-coded connectors for all control functionsUp to 16 digital inputs and 2 relay outputs are set with standard functions as factory default  

Feig Electronic 1-phase frequency converter control unit for doors, supply voltage 110 - 240 V, for drives up to 0,75 kW (5A) with electronic or digital limit switch, with 24V (250mA) power supply for accessories, includes connection cable with CEE-plugDescription:The door control unit TST FUZ2-A by FEIG Electronic is a controller with built-in frequency converter for drives with up to 0,75kW. The frequency converter allows for soft-start and -stop of the door, resulting in reduced mechanical wear and longer product lifetime. With an increased opening speed of the door, processes can be optimized and waiting times can be reduced. The unit comes with a 24V/ 250mA power supply for external accessories, like radar sensors, signal lights etc. It works with digital or mechanical limit switches for door positioning. Due to the very wide range of parameter adjustments offered by all FEIG control units, the TST FUZ2-A can be programmed for many different door functions. The parameter setting is done by using the push-buttons and the segment display of the controller, no additional accessories needed! Installation of the controller is easy and the auto-setting and calibration feature of the controller simplifies it even further as it automatically sets the frequency converter parameters for soft-start and -stop.Properties:Frequency converter allows for variable and adjustable door speedsSoft-start and soft-stop featurefor drives up to 0,75kWFulfils the required standards for door controls (TüV, CE)Integrated interface for sensing edges (resistive or optical systems)Optional plugin card for 2-channel radio systemPluggable connectors for all important control functionsUp to 14 digital inputs and 2 relay outputs are set with standard functions as factory default

Feig Electronic door control unit with reversing contactor, for drives up to 2,2kW with mechanical or digital limit switch, with 24V (500mA) power supply for accessories, includes connection cable with CEE-plugDescription:Please note:This product has been discontinued by the manufacturer and is no longer available.In the "follow-up articles" tab you can find a link to the suggested replacement product.